Detailed profile:
 MH355 User manual.pdf
- Streamlined molded housing results in attractive appearance and enables easy cleaning.
- LCD display.
- Electronic trim function makes it easy to switch from trim and section mode
- Specimen retraction mechanism protects specimen from blade damage
- Section counting function counts total section pieces and thickness.
- Precise micro motion specimen feeding system uses a micro computer, optical signal and stepper motor to control specimen feeding and makes feeding more precise.
- Internationally accepted slide mechanism and groove ensures the precision of specimen movement while making the unit free from lubrication and maintenance requirements.
- Unit contains a handwheel force balancing system for adjusting the balancing force during sectioning, making rotation even and smooth;
- Two safety locking mechanisms on the handwheel; one locks on the top; the other locks at any position
- The disposable blade can move horizontally to avoid the dangers of unintended contact with the blade. Every blade cuts specimen by three parts, which ensures the entire use of blade edge
- The waste tray collects sectioning debris and is easily removed for cleaning
- Cassette clamp and C clamp are optional
- Specimen orientation on X/Y axes 8°
- Alarm to warns of forward or backwards limitation.
- Self-diagnostic prompt.
Technical Specifications
- Section thickness range：1～80μm
- Section thickness setting：1～20μm，in 1μm increment
20～40μm，in 2μm increments
40～80μm，in 10μm increments
- Trimming thickness: 1～600μm
- Trimming thickness setting:
1～50μm，in 5μm increments; 50～100μm，in 10μm increments;
100～600μm，in 50μm increments;
- Specimen retraction: 0～80μm，in 5μm increments ;
- Specimen vertical stroke：70mm
- Specimen horizontally stroke：25mm
- Max specimen size with cassette clamp (H×W)：40mm×28mm
- Max specimen size with C clamp (H×W)：55mm×40mm
- Dimensions (W×D×H)：560×470×300mm
- Weight：35kg |
